GNGELECTRIC

GNGelectric

Gngelectric supply inexpensive electric bike kits system which allow you
 to convert your own conventional bike into a battery-powered electric bicycle.

Forums

Post Reply
Forum Home > General Discussion > What removal tool do I need??? ASAP!!

messyhair
Member
Posts: 5
Hi, what is the SPECIFIC tool needed to remove the small 13 tooth sprocket on the right side of the 60v650w chain reduction kit?? The sprocket is above the chain tensioner and connects to the large chainring I removed the Allen bolt on the center of the sprocket but the sprocket still doesnt move Thanks
July 21, 2014 at 2:19 AM Flag Quote & Reply

NB
Member
Posts: 2

Remove the bolt and use a gear puller to pull off the spindle (it is keyed and will not turn/is not screwed on)

example: 

July 21, 2014 at 2:00 PM Flag Quote & Reply

messyhair
Member
Posts: 5
Ok thanks Have you used this puller for that sprocket before??? Is there a particular puller that works well?? Thanks a lot!!!!
July 21, 2014 at 10:23 PM Flag Quote & Reply

gngelectric@hotmail.com
Site Owner
Posts: 83

Hi ,

You can use the tool(as the pictures shown) to remove the 12T freewheel.

Thanks!


July 25, 2014 at 3:18 AM Flag Quote & Reply

You must login to post.